Wire loader and unloader interfaced to the machine control. Feeder will pick wires out of a bin, load them into machine, stage next part during grinding and unload finished part.
Pulls finished part out of grind zone using gripper mechanism and places it in receiving tray. This system is ideal for handling short parts and often used in conjunction with the Wire Cutter.
Uses bushings for a burr free cut. Cutting wire after grinding provides the capability of grinding multiple short parts out of one long wire in one feeding operation, reducing cycle time.
Designed to add horizontal grooves to parts, this high-speed sub-spindle attaches to the Work Wheel slide for easy positioning.
10' (305 cm), 16' (500 cm) long wire/part loader and unloader interfaced to the machine control. Feeder will pick wires out of a bin, load them into machine, stage next part during grinding and unload finish part allowing hands-off machine operation.
30 gallon capacity with two removable settling tanks centrifugal pump & filtration package
Uses a formed template to dress shallow shapes into the grinding wheel. An auto dress version of this dresser available.
Uses a formed template to dress shallow shapes into the regulating wheel.
Available in manual and hydraulic version.
Provides the capability to grind nitinol wire directly off a spool. The feeder pulls and cuts wire to user determined length, and feeds it to the grinding machine.
Available setup reduction metrology device (P4K) which scans and provides feedback of the entire component geometry for all parts in a cycle to automatically correct the grinding wheel dress shape (correcting the wheel dress shape from any measurement device is patent-pending)
Supports and facilitates the material rotation at the entry and exit sides of the grinding machine. Typically used in a thrufeed operation.
Automatically picks parts from trays, loads into machine, unloads and places back to parts tray. Fully guarded and interlocked access doors. Robot arm incorporates two grippers for staging the loading and unloading during the grind cycle, reducing idle time.
For rapid changeover from one set of part holding grippers to a different set (i.e. 8 station to 5 station). The entire gripper assembly is easily disconnected, lifted out of the keyed mount, and then dropped into the next mount and reconnected.
Both Z and X axis of feeder have velocity and position control set on the machine touch screen.
High-speed with programmable positioning, allowing for the fast grinding of double-ended grinds and faster part extraction, reducing cycle time.
Post grinding, system is integrated into the cell to pressure clean parts.
System engineered and developed by Glebar to separate the incoming parts and inspect each part individually at a fast rate (as fast as 2 parts-per-second in a recent case study) after exiting the vibratory bowl as a continuous row of parts.
Post grinding and cleaning, the data is collected, analyzed and fed back to the machine for automatic size compensation. Measurements are shown on a trend graph on the machine control.
Built specific for the part; integrated into the cell.
Available metrology device (P4K) which can serve as a closed-loop quality control device that feeds back diameter to the control system for automatic size compensation
A built-in automatic wheel balancing system dynamically adjusts and eliminates wheel vibration, producing superior surface finishes and improved wheel life.
Integrated acoustic emissions system for ease of setup.
Comes with arbor, flange with four weights and stand. Balanced grinding wheels are critical for high precision parts.
Glebar’s patent pending controlled motorized work rest blade option adjusts the lateral position of the parts (when grinding), which is ideal when controlling a radius behind a fastener head, for example.
Collects and removes debri and dust from the work area.
Diameter contact gauge mounted on exit side of the machine measures the ground part. Diameters at several points can be measured, used for size compensation, and compared against high and low user-defined limits. Contact measurement is unaffected by coolant.
Parts can be sandblasted in-line with CAM.2’s positional accuracy, eliminating additional handling and a secondary operation.
Built specific for the part, the gantry picks and places parts in the grind zone in one motion.
An electromagnetic testing method used in nondestructive testing (NDT) making use of electromagnetic induction to detect and characterize surface and sub-surface flaws in conductive materials.
Built specific to the part, Glebar offers a variety of conveyors which move parts through the process seamlessly and quickly.
Includes dresser head assembly, Stylus checking system, slide assembly and platen which mounts on the back of the machine. This system enables the user to dress the grinding wheel while still mounted on the machine.
Enables the machine to run in centerless mode without the need for a regulating wheel or work rest insert. Together with the built in CNC dressing feature of the machine, part shapes up to 1.0" long may be plunged to size.
Equipped with a diamond roll to dress both wheels.
Designed to part specifications and integrated with machine controls. Custom feeding is available built to part specification.