 |
The PG-9DHD can form ceramic materials into verious shapes at very high rates with excellent quality output. Multiple forms in the wheel can produce multiple parts per cycle. Touch screen controls can interface with gauge systems for auto size compensation. Grinding wheel can be shaped to form part to your specifications. |
| Multiple forms can be ground per cycle from rod |
|
 |
The TF-9DHD is capable of thrufeeding as well as infeeding ceramic rod. Machine is equipped with 8-5/8" wide wheel. |
| Ceramic rod centerless thrufed achieving +/-0.00005" tolerance. |
|
 |
The DD-7 is the smallest double disc grinder on the market and is equipped with two 7” diameter wheels making it ideal for running small parts at astonishing speed and accuracy. Various feeding systems are available depending on parts configurations. |
| Circuit board drills at a rate of 10,000 pieces per hour, holding tolerances of +/- 0.0005". |
|
|
 |
The PG-9x20DHD Computer Controlled Plunge grinder is equipped with a 20" wide wheel. Up to 20" long rod can be centerless plunge ground to size. Machine is equipped with computer touch screen control which can interface with gauging systems for auto size compensation. |
| Green Tungsten carbide rod up to 20" long can be plunge ground straight within 0.002" and round within 0.002". |
|
|
 |
FW-9D precision grinds outside diameter concentric to inside diameter. Touch screen controls can interface with gauge systems for auto size compensation. Grinding wheel can be shaped to form part to your specifications. |
| Oxygen sensor made from green ceramic rod, +/- 0.002" Tol, Roundness 0.002" in 10 seconds. |
|
|
